For Xfinity, Comcast xFi and most 10.0.0.1 gateways
10.0.0.1 Admin Login: Step-by-Step Guide
Typing 10.0.0.1 into a browser opens your gateway's admin page, the screen where you change your WiFi name, password, and a handful of other network settings. A lot of people type it slightly wrong, as 10.0.0.0.1 with an extra dot, or search for it as a URL with https:// in front, and land here instead. Below is the exact login sequence, the default username and password Xfinity ships on most of its gateways, and what to try when the page refuses to load at all.
Quick answer: log in now
If you already know the drill and just need the steps in front of you, here they are. The longer explanation of each step, plus what to do if one of them fails, follows further down the page.
- Connect a phone, laptop or tablet to your home WiFi, or plug a computer directly into the gateway with an ethernet cable.
- Open any browser and type 10.0.0.1 into the address bar at the top, not a search box, then press enter. Typing it as https //10.0.0.0.1/admin or into Google's search field will not work the same way.
- Enter admin as the username. For the password, try password first. If that fails, use the WiFi password printed on the sticker on the bottom or side of the gateway itself.
- If neither login works, skip to the credentials and troubleshooting sections below before trying a factory reset.
What is 10.0.0.1, and why do people type 10.0.0.0.1?
10.0.0.1 is a private IP address, a number your own home network uses internally and that never appears on the public internet. Most home routers point this kind of address at themselves, and on Xfinity and Comcast xFi gateways specifically, 10.0.0.1 is where the built-in Admin Tool lives. Typing it into a browser does not search the web, it asks your own gateway, sitting a few feet away, to show its settings page.
10.0.0.0.1 is not a real, routable IP address at all. A standard IPv4 address has exactly four number groups separated by dots (10.0.0.1 has four: 10, 0, 0 and 1), while 10.0.0.0.1 has five. It is almost always a simple typo, an extra dot added out of habit, or a misremembered version of 10.0.0.1 from a bookmark or a screenshot. Browsers that get a five-part address like this typically show a plain connection error rather than any kind of gateway page, so if that is what happened to you, the fix is just to retype it with the three dots shown in the quick answer above.
Default Xfinity username and password for 10.0.0.1
10.0.0.1 is used almost exclusively by Xfinity and Comcast xFi gateways rather than being a generic router address shared across many brands, so the table below covers what actually ships on that hardware rather than a long, mixed list of unrelated router makers.
| Gateway generation | Username | Password | Notes |
|---|---|---|---|
| Older gateways (including Wireless Gateway 1, Wireless Gateway 2 and XB3) | admin | password | The classic factory default. These older models do not support the newer Admin Tool app toggle described below. |
| Newer XB6/XB7/XB8-class gateways | admin | Your WiFi password, printed on the gateway's label | Recent firmware ties the admin login to the gateway's own WiFi password rather than a fixed word. |
| Any gateway, after a factory reset | admin | password (or the label password on newer models) | A factory reset restores the original default, but also erases any custom WiFi name and password you had set. |
Since early 2026, some newer gateways also require switching on Admin Tool access from inside the Xfinity app before the 10.0.0.1 page will accept any login at all. If the page loads but rejects both sets of credentials above, check the app for that toggle before assuming the password is wrong.
What can you actually do once you are logged in?
The 10.0.0.1 Admin Tool is a fairly small settings page compared to a full router console, but it covers the handful of things most people actually come here for.
- On older gateways (Wireless Gateway 1/2 and XB3), change your WiFi network name (the SSID) and password directly here, the single most common reason people log in at all. On newer XB6/XB7/XB8-class gateways, this specific setting has moved to the Xfinity app; the Admin Tool on those models still handles the other settings on this list.
- See which devices are currently connected to the network, useful for spotting an unfamiliar device using your WiFi.
- Turn on a separate guest WiFi network with its own password, so visitors do not need the main household password.
- Set up basic parental controls or a device pause, temporarily cutting off internet access to one device without changing the whole network's password.
- Restart the gateway remotely from the settings page itself, which can solve a slow connection without unplugging any hardware.
- Change the admin login itself, the single most useful change to make right after a first login on a gateway still using the word password.
10.0.0.1 says the site cannot be reached: common fixes
A handful of specific things cause most 10.0.0.1 connection failures, roughly in order of how often each one turns out to be the cause.
- Check the device is on the home network, not on mobile data. A phone that has quietly switched to cellular data cannot reach a private address like 10.0.0.1, since that only exists on your own local network.
- Type the address directly into the browser's address bar, not a search engine box. Typing 10.0.0.1 into Google will run a web search rather than opening the gateway, and many people who typed https //10.0.0.0.1/admin into a search bar landed here for exactly this reason.
- Try 10.0.0.1 with nothing after it, no /admin and no trailing slash needed on most gateways, then let the page itself lead to a login form.
- Restart the gateway by unplugging it for about ten seconds. This clears a surprising number of one-off admin page failures without touching any saved settings.
- If the network itself uses a different address range, the admin page may sit at 192.168.1.1 or 192.168.0.1 instead, see the comparison below.
- As a last resort, a factory reset (usually a recessed button held for around 10 to 15 seconds) restores the original login, but also wipes the custom WiFi name and password, so treat it as the final option rather than the first one.
10.0.0.1 vs 192.168.1.1 vs 192.168.0.1: which one is mine?
All three are private addresses reserved for exactly this purpose, pointing a browser at your own router instead of the internet, but which one actually works depends on the hardware, not on anything you did wrong.
| Address | Typically used by |
|---|---|
| 10.0.0.1 | Xfinity and Comcast xFi gateways, plus some business-class equipment |
| 192.168.1.1 | Linksys, Netgear, Asus, and many routers supplied by Spectrum or Verizon Fios |
| 192.168.0.1 | TP-Link, D-Link and Tenda, among others |
These are on entirely separate subnets, so a device configured to answer at 10.0.0.1 will not respond at 192.168.1.1 and the other way around, they are not interchangeable fallbacks for each other. If 10.0.0.1 refuses every connection attempt and the troubleshooting steps above have not helped, checking the label on the underside of the gateway for its actual assigned address, or trying 192.168.1.1 in a second tab, takes less time than any deeper troubleshooting.
Is it safe to open your router's admin page?
Yes, with one condition worth being deliberate about. The admin page at 10.0.0.1 is not reachable from the public internet at all, only from a device already connected to your own home network, so opening it does not expose anything to strangers browsing the web from outside your house. This guide itself never sees any of that either, see the privacy policy for exactly what this site does and does not collect.
The part worth taking seriously is what happens after you log in, not the login screen itself. Anyone who can reach 10.0.0.1 and knows the default admin and password combination can see and change your WiFi settings, which is exactly why changing the default admin password (not just the WiFi password) once you are logged in is worth the extra minute, particularly on a factory-fresh gateway or one that still uses the word password as its login. Guests connected only to a shared WiFi network typically cannot reach the admin page unless they know both the address and the login, but a shared password combined with a known default is a small, avoidable gap.
Two habits close most of that gap without any extra tools. First, treat the admin login as a second, separate password from the WiFi password itself, not the same word reused twice. Second, if the household WiFi password has been shared with enough visitors over the years that it no longer feels private, a guest network (mentioned above) keeps casual visitors off the same network segment as the admin page entirely, rather than relying on a long-forgotten default staying secret.
A note on 1.0.0.1 and Piso WiFi
Some searches for 10.0.0.1 are actually looking for 1.0.0.1, the login address used by Piso WiFi vending machines, a coin-operated shared WiFi system common in parts of Southeast Asia. It is a different product entirely, run by independent vendors rather than by an ISP, and the login page, default credentials and pause/resume controls are specific to that hardware rather than to a home gateway. If that is what brought you here, the address and login screen you actually want will look nothing like the Xfinity Admin Tool described above. This site's terms of use cover the full independence disclaimer for both brands mentioned here.